When Team Quest hits the road to work with kids, the Starhawk model rocket is the rocket of choice for tight budgets and smaller flying fields. The Starhawk's streamlined construction, single piece fin-unit, and streamer recovery ensure that it can be built and ready for launch in a single 45 minute session! This kit does not require painting and colors of the nose cone and fin-unit may be different than shown in the image.
Secure Payments
We use Mollie for secure payments !
Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3 hours.
This kit requires assembly. Hobby glues, finishing supplies, building tools, launch system and rocket motors for launching are not included.
Launch supplies sold separately. Requires Complete Launch System (Q7700), Quest Q-Jet rocket motors with FirstFire Micro Initiators and Recovery Wadding. One 9-volt, snap-top, Lithium battery is required for the Q2 Launch Controller - Not Included.
Also available in Value Packs of 12 (Q5483) and 25 (Q5583) rockets that are perfect for schools, camps, clubs and youth group programs including the Civil Air Patrol, 4H, Starbase and Scouting's Space Exploration Merit Badge requirements.
Recommended for ages 10 to adult. Direct adult supervision is suggested for those under 12 years of age when building or flying model rockets.
Specifications:
Skill Level 1
Length: 13 in. (33 cm)
Diameter: 0.787 in. (20 mm / T20)
Weight: 0.81 oz. (23 g)
Recovery: Streamer
Fins: Plastic Fin-unit
Décor: Self-adhesive Decals
Flights up to 600 ft. (183 m)
Uses Quest Q-Jet™ Black Max™: A3-4FJ (1st flight), B4-4FJ rocket motors.
Uses Quest Q-Jet™ White Lightning™: B6-4W rocket motors.
Other brands of model rocket motors, with a similar motor type (power) designation, should be OK for use in this product.
Specific References
Specifications: Motor Diameter: 0.71 inches (18mm) Casing Length: 2.75 inches (70mm) Total Impulse: 4.9 N-sec Average Thrust: 4.2 newtons Peak Thrust: 8.9 N-sec Thrust Duration: 1.2...
Here you can add custom original content(text, images, videos and more) for each product page.
16 other products in the same category:
The Astra III rocket is easy-to-assemble and features colored body tubes, plastic nose cone and molded plastic fin-can assembly, plus Kevlar/elastic shock cord system, quick-release motor mount,...
Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3...
We can't think of many other ways that you can send an egg sailing 400 feet into the air and return it safely to Earth (and in time for breakfast!) The specially designed nose capsule comes...
The Novia model rocket is one of the most traditional of our kits. The Novia features balsa wood fins and streamer recovery. Did you know the Novia has five possible fin configurations? Group...
Quest Level 2 experienced modeler kits require some basic beginner skills in model rocketry construction and finishing. Assembly, finishing and glue drying time can take a day or more. This kit...
The Quest Payloader One model rocket kit is one of three Quest model rockets to use TTW Through-The-Wall balsa fin attachment. There are three precise pre-cut slots in the body tube that allow for...
Quest Skill Level 1 Quick-Kits do not require painting or finishing beyond the application of self-adhesive decals and can usually be completed in 30 to 45 minutes or less. This kit requires...
The Viper model rocket combines the simplicity of a single piece fin-unit with the added complexity of parachute recovery. The Viper model rocket provides the perfect combination of a challenge and...
The Novia model rocket is one of the most traditional of our kits. The Novia features balsa wood fins and streamer recovery. Did you know the Novia has five possible fin configurations? Group...
Quest Skill Level 1 Quick-Kits do not require painting or finishing beyond the application of self-adhesive decals and can usually be completed in 30 to 45 minutes or less. This kit requires...
Novia: The Novia model rocket is one of the most traditional of our kits. The Novia features balsa wood fins and streamer recovery. Did you know the Novia has five possible fin configurations?...
Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3...
Quest Level 2 experienced modeler kits require some basic beginner skills in model rocketry construction and finishing. Assembly, finishing and glue drying time can take a day or more. This kit...
The flagship of the Quest model rocket line! The Quest Astra is one of the most widely used model rocket kits offered and features Quest's TTW “Through-The-Wall” balsa fin design. TTW fin...
Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3...
Fun-to-fly and easy-to-build. This cone shaped rocket is perfect for small flying areas. Great for 'drag races' or spot landing contests. No Wadding Required with gentle tumble recovery. This kit...
When Team Quest hits the road to work with kids, the Starhawk model rocket is the rocket of choice for tight budgets and smaller flying fields. The Starhawk's streamlined construction, single piece fin-unit, and streamer recovery ensure that it can be built and ready for launch in a single 45 minute session! This kit does not require painting and colors of the nose cone and fin-unit may be different than shown in the image.
error Your review appreciation cannot be sent