The flagship of the Quest model rocket line! The Quest Astra is one of the most widely used model rocket kits offered and features Quest's TTW “Through-The-Wall” balsa fin design. TTW fin attachment makes building so much easier. It really helps you glue the rocket fins on straight and in the correct position. The Astra includes color coded parts to make identification for assembly easier. It uses a Kevlar shock cord that is anchored right to the engine mount for reliable recovery. These features give you the benefit of a more successful building experience.
Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3 hours.
These kits require assembly. Hobby glues, finishing supplies, building tools, launch system and rocket motors for launching are not included.
Launch supplies sold separately. Requires Complete Launch System (Q7700), Quest Q-Jet™ rocket motors with FirstFire Micro™ Initiators and Recovery Wadding. One 9-volt, snap-top, Lithium battery is required for the Q2 Launch Controller - Not Included.
This kit is also available individually (Q1004) and in Value Packs of 25 rockets (Q5584).
Recommended for ages 10 to adult. Direct adult supervision is suggested for those under 12 years of age when building or flying model rockets.
Length: 15 in. (38.1 cm)
Diameter: 0.984 in. (25 mm)
Weight: 1.0 oz. (28.4 g)
Recovery: 14 in. Parachute
Fins: Laser-cut Balsa
Décor: Self-adhesive Decal
Maximum Altitude: 1200 ft. (366 m)
Uses Quest Q-Jet™ A3-4 (1st flight), B4-4, C12-6, D16-6, D16-8 composite propellant rocket motors. Other brands of model rocket motors, with a similar motor type (power) designation, should be OK for use in this product.
error Your review appreciation cannot be sent