- New
Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3 hours.
This kit requires assembly. Hobby glues, finishing supplies, building tools, launch system and rocket motors for launching are not included.
Launch supplies sold separately. Requires Complete Launch System (Q7700), Quest Q-Jet™ rocket motors with FirstFire Micro™ Initiators and Recovery Wadding. One 9-volt, snap-top, Lithium battery is required for the Q2 Launch Controller - Not Included.
Recommended for ages 10 to adult. Direct adult supervision is suggested for those under 12 years of age when building or flying model rockets.
Skill Level 1
Length: 14 in. (35.6 cm)
Diameter: 1.181 in. (30 mm / T30)
Weight: 1.1 oz. (31.2 g)
Recovery: 14 in. Parachute
Fins: Laser-cut Balsa
Décor: Self-adhesive Decals
Flights up to 1500 ft. (457 m)
Uses Quest Q-Jet™ Black Max™: A3-4FJ (1st flight), B4-4FJ, C12-4FJ, C12-6FJ, C12-8FJ, D16-6FJ, D16-8FJ rocket motors.
Uses Quest Q-Jet™ White Lightning™: B6-4W, C18-6W, C18-8W, D20-6W, D20-8W rocket motors.
Other brands of model rocket motors, with a similar motor type (power) designation, should be OK for use in this product.
Specific References
Specifications: Motor Diameter: 0.71 inches (18mm) Casing Length: 2.75 inches (70mm) Total Impulse: 9.8 N-sec Average Thrust: 11.7 newtons Peak Thrust: 23.6 N-sec Thrust Duration:...
Specifications: Motor Diameter: 0.71 inches (18mm) Casing Length: 2.75 inches (70mm) Total Impulse: 13.8 N-sec Average Thrust: 18.2 newtons Peak Thrust: 24.3 N-sec Thrust Duration:...
Specifications: Motor Diameter: 0.71 inches (18mm) Casing Length: 2.75 inches (70mm) Total Impulse: 4.9 N-sec Average Thrust: 4.2 newtons Peak Thrust: 8.9 N-sec Thrust Duration: 1.2...
Specifications: Motor Diameter: 0.71 inches (18mm) Casing Length: 2.75 inches (70mm) Total Impulse: 9.8 N-sec Average Thrust: 11.7 newtons Peak Thrust: 23.6 N-sec Thrust Duration:...
Specifications: Motor Diameter: 0.71 inches (18mm) Casing Length: 2.75 inches (70mm) Total Impulse: 9.8 N-sec Average Thrust: 11.7 newtons Peak Thrust: 23.6 N-sec Thrust Duration:...
Specifications: Motor Diameter: 0.71 inches (18mm) Casing Length: 2.75 inches (70mm) Total Impulse: 13.8 N-sec Average Thrust: 18.2 newtons Peak Thrust: 24.3 N-sec Thrust Duration:...
Specifications: Motor Diameter: 0.71 inches (18mm) Casing Length: 2.75 inches (70mm) Total Impulse: 13.8 N-sec Average Thrust: 18.2 newtons Peak Thrust: 24.3 N-sec Thrust Duration:...
Here you can add custom original content(text, images, videos and more) for each product page.
16 other products in the same category:
The Quick-Q rocket does not require painting or finishing beyond the application of self-adhesive decals. It features colored body tubes, plastic nose cone and molded plastic fin-can assembly, plus...
Aerotech Astrobee D™ Specifications: Length: 68”/173 cmDiameter: 2.6”/6.7 cmWeight (without motor): 28oz/790gmsFins: 4Product No. 89015 Recommended RMS Motors: Motor Proj. Altitude (ft/m)...
Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3...
This package contains the Lift-Off Launch Pad and the Q2 Controller together for a great savings to the rocketeer! The Quest Lift-Off Launch Pad features a 36-inch (91cm) two-piece launch rod,...
AEROTECH Motorbuis kit 1.9/4-fin Complete motor assembly for 1.9" rockets. Includes: 12" Motor Tube, Fin-Lok™ rings, 3 x strong Aero-Fibre™ centering rings, thrust ring, motor hook, screw eye,...
Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3...
Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3...
Quest Skill Level 1 Quick-Kits do not require painting or finishing beyond the application of self-adhesive decals and can usually be completed in 30 to 45 minutes or less. This kit requires...
Quest Level 2 experienced modeler kits require some basic beginner skills in model rocketry construction and finishing. Assembly, finishing and glue drying time can take a day or more. This kit...
error Your review appreciation cannot be sent