| PAR-18 | 18" rip-stop nylon conical parachute, ~4" spill hole | 0.6 oz. |
If you have seen PML`s Dura-Chute parachutes out on the field, you know that we have the best parachutes on the market! Starting with the PAR-60 (60" diameter), we add heavy duty reinforcement webbing to each seam of the chute. This includes the seams between every panel, the skirt, the apex, and cord attach points. These are extemely rugged chutes!
"PML chutes were judged the highest in overall ratings of strength, quality, and appearance as published in an HPR Magazine report, The Great Parachute Driftoff."
All PML parachutes have a spill hole at the apex to reduce sway and drift. Approximate sizes (they may vary slightly) for the spill holes are shown below.
Here you can add custom original content(text, images, videos and more) for each product page.
9 other products in the same category:
PAR-36 36" rip-stop nylon conical parachute, ~8" spill hole 2.9 oz. PML "Dura-Chute" rocket parachutes are professionally made, multipanel, 15 degree conical design, rip-stop nylon...
PML "DURA-CHUTE" ROCKET PARACHUTES ARE PROFESSIONALLY MADE, MULTIPANEL, 15 DEGREE CONICAL DESIGN, RIP-STOP NYLON CONSTRUCTION. If you have seen PML's Dura-Chute parachutes out on the field, you...
PAR-54 54" rip-stop nylon conical parachute, ~10" spill hole 4.8 oz PML "Dura-Chute" rocket parachutes are professionally made, multipanel, 15 degree conical design, rip-stop nylon...
PML "DURA-CHUTE" ROCKET PARACHUTES ARE PROFESSIONALLY MADE, MULTIPANEL, 15 DEGREE CONICAL DESIGN, RIP-STOP NYLON CONSTRUCTION. If you have seen PML's Dura-Chute parachutes out on the field, you...
PAR-48 48" rip-stop nylon conical parachute, ~8" spill hole 4.1 oz. PML "Dura-Chute" rocket parachutes are professionally made, multipanel, 15 degree conical design, rip-stop...
PAR-24 24" rip-stop nylon conical parachute, ~5" spill hole 1.6 oz. PML "Dura-Chute" rocket parachutes are professionally made, multipanel, 15 degree conical design, rip-stop nylon...
PAR-30 30" rip-stop nylon conical parachute, ~5" spill hole 2.4 oz. PML "Dura-Chute" rocket parachutes are professionally made, multipanel, 15 degree conical design, rip-stop nylon...
Customers who bought this product also bought:
Estes 3/16 Two-Piece MAXI™ Launch Rod This 3/16″ (5 mm) diameter two-piece launch rod is necessary for most of our larger rockets that are powered by C11, D and E Engines. Can be used in the 2215...
Adapter Assembly, 24-29mm Ready to use! Precision Machined and Type II Black Anodized 6061-T6 Aluminum A2429 Fits 24mm Motors to Rockets with 29mm Retainers No Need To Buy a Separate Motor...
Estes 3085 rompbuis BT-20 4-pack Use tube couplers to connect tubes of the same diameter. Four tubes per package. Use with the NC-20 nose cone
Estes is proud to welcome the newest member of the Bertha family, the Boosted Bertha. This beaut rounds out the collection by being the first in the series to feature a two-stage rocket booster. A...
Phenolic Bodytube PT-3.0 Phenolic tubing is a resin impregnated, spiral wrapped, and heat cured tube. It is much stronger than cardboard tubing, with almost 5x the compression...
PARACHUTES 14" Parachutes: 14″ (actual is 15″ diameter) parachute with spill hole. 6 lines. 18" Parachutes: 18″ parachute with spill hole. 6 lines. 21" Parachutes: 21″ parachute with spill hole....
error Your review appreciation cannot be sent